Chimney Trouble?
We’ll Fix It.
Sweeping, inspections, masonry repair, relining and leak repair for Stamford homes, from Shippan to North Stamford. You get the price before we start.
Ready for a Safe, Warm Winter?
Call, text or send a quote request. Fall fills up fast in Fairfield County, so it pays to get on the schedule early.
Call (475) 335-8765Every Chimney Service, One Call
From a routine sweep to a full rebuild, we handle the whole chimney, top to bottom, for homeowners across Stamford and Fairfield County.
Routine Maintenance & Cleaning
3 servicesChimney Sweeping
We brush out soot, ash and flammable creosote from the flue liner, firebox, damper and smoke chamber with rotary whips and specialty brushes.
Dryer Vent Cleaning
We clear lint clogs from your dryer exhaust duct. Same brushing equipment, same goal: stopping a fire before it starts.
Animal & Debris Removal
Bird nests, raccoons, squirrels, leaves and twigs pulled out of the flue so smoke can get out and critters stay out.
Inspections & Diagnostics
4 servicesLevel 1 Inspection
A visual check of the readily accessible inside and outside parts of the chimney, usually done with your sweep when nothing about the system has changed.
Level 2 Inspection
Required when buying or selling a home, after a chimney fire or storm, or when changing fuel types. Includes a video camera scan of the flue to find hidden cracks.
Level 3 Inspection
When a serious hidden problem is suspected, we remove certain parts of the chimney or building, like drywall or masonry, to get eyes on it.
Draft & Smoke Testing
Fireplace pushing smoke into the room? We test for negative air pressure, a cold flue or a sizing problem and tell you what will fix it.
Masonry & Structural Repairs
6 servicesTuckpointing (Repointing)
We grind out crumbling mortar between bricks or stones and pack in fresh mortar to restore strength and keep water out.
Brick & Stone Replacement
Flaking, cracked or water-damaged bricks removed and replaced with matching masonry.
Chimney Crown Repair & Rebuilding
We fix cracks in the concrete slab at the top of your chimney, or pour a new, properly sloped crown with an overhang to shed rain.
Smoke Chamber Parging
We smooth rough, stepped brick inside the smoke chamber with refractory mortar to improve draft and cut down on creosote traps.
Firebox Rebuilding
Cracked firebrick and worn refractory mortar replaced in the burning area, where the heat is most intense.
Partial or Full Chimney Rebuilds
Leaning, crumbling, or storm- or lightning-damaged stacks torn down and rebuilt from the roofline up, or from the foundation up.
Flue Liner Services
3 servicesStainless Steel Relining
Flexible or rigid stainless liners installed inside damaged clay flues, or sized down to properly vent a modern furnace, water heater or wood stove insert.
Cast-in-Place Relining
A special cement mix is poured around an inflated form inside the chimney to create a seamless, insulated new liner.
HeatShield® / Cerfractory Resurfacing
A ceramic-refractory sealant that repairs cracked joints and missing mortar inside your existing terra-cotta clay tile liner.
Waterproofing & Leak Prevention
3 servicesFlashing Repair & Replacement
We seal or replace the step and counter flashing where the chimney meets the roof, the most common place chimney leaks start.
Water Repellent Application
Vapor-permeable silane/siloxane sealer sprayed on the masonry so bricks shed rain but trapped moisture can still dry out.
Cricket (Saddle) Installation
A small peaked roof built behind wide chimneys so snow, ice and rain run off instead of pooling against the back wall.
Hardware, Parts & Upgrades
5 servicesChimney Cap Installation
Metal mesh caps that keep rain, snow, embers and wildlife out of your flue.
Chase Cover Replacement
Rusted galvanized covers on factory-built chimney chases replaced with stainless steel or copper that lasts.
Top-Sealing Damper Installation
Warped or missing throat dampers replaced with a gasket-sealed damper at the top of the flue, worked by a cable in the firebox, to keep heated air in the house.
Fireplace & Insert Installation
Wood-burning inserts, gas logs, pellet stoves and factory-built zero-clearance fireplaces installed.
Glass Door & Screen Installation
Custom tempered-glass doors or mesh spark guards for a safer fireplace and less heat loss when it’s not in use.
Why Chimneys Here Wear Out Faster
Stamford sits right on Long Island Sound, and its housing runs from century-old colonials in Glenbrook and the Cove to newer homes up in North Stamford. That mix, plus New England weather, is hard on masonry.
Freeze-Thaw Winters
Water soaks into brick and mortar, freezes, expands and cracks it a little more every winter. Tuckpointing and a good water repellent stop the cycle.
Salt Air by the Sound
Homes near Shippan, the Cove and the waterfront see more corrosion on caps, chase covers and flashing. Stainless steel and copper hold up far longer.
Nor’easters & Storms
High wind and driving rain can loosen flashing and crack crowns. After a big storm, a Level 2 inspection catches damage you can’t see from the ground.
Older Clay Liners
Many older Stamford homes still have original terra-cotta flue tiles. We check them on camera and resurface or reline when they’re cracked.
If It’s Not Right, We Come Back.
Every repair comes with our workmanship guarantee. If something isn’t right after we leave, call us and we’ll come back and make it right.
Why Stamford Calls Us
- 01
We Show You What We Find
Photos and camera footage of your chimney, so you can see the problem for yourself before you decide anything.
- 02
Price Before We Start
Free estimates on repairs. No surprise add-ons when the bill comes.
- 03
The Whole Chimney, One Company
Sweeping, masonry, liners, flashing and caps. No juggling a sweep, a mason and a roofer.
- 04
Clean, Careful Work
Drop cloths, HEPA vacuums and covered furniture. We leave your living room the way we found it.
We’re a local company serving Stamford and the rest of lower Fairfield County. When you call Smith Family Chimney, you get a straight answer about what your chimney needs, the price before we start, and a crew that stands behind the work.
Get A Free QuoteChimney Service Across Stamford, CT
We work in every Stamford neighborhood, from the high-rises around Harbor Point to the older homes in Glenbrook and the larger properties up in North Stamford, plus the towns next door.
Stamford zip codes
Stamford neighborhoods
Nearby towns
Common Chimney Questions
Once a year is the standard. The National Fire Protection Association (NFPA 211) recommends that chimneys, fireplaces and vents be inspected every year, and swept when needed. If you burn a lot of wood through a Connecticut winter, or you burn softwood or wood that isn’t fully dry, you may build up creosote faster and need it more often. Late summer and early fall are the best times to book, before the first cold snap fills up the calendar.
Yes, that’s the industry standard. A Level 2 inspection is recommended any time a home changes hands, because a regular home inspector usually can’t see inside the flue. We run a video camera up the chimney so buyers and sellers know about any hidden cracks or damage before closing. We can usually work around your closing timeline. Just tell us the date when you call.
The most common causes we see are:
- Worn or failed flashing where the chimney meets the roof (the #1 cause)
- A cracked chimney crown
- Missing chimney cap, so rain falls straight down the flue
- Crumbling mortar joints or spalling brick that soak up water
Stamford’s freeze-thaw winters make small cracks bigger every year, so it’s worth fixing a leak early.
Creosote is the dark, tar-like residue left behind when wood smoke cools inside the flue. It’s highly flammable, and when enough of it builds up, it can catch fire inside the chimney. A regular sweep removes it before it gets to that point.
Usually it’s one of a few things: negative air pressure in a tight, well-sealed house, a cold flue that hasn’t warmed up yet, a blocked flue (nests and debris are common), or a flue that’s the wrong size for the fireplace opening. Our draft and smoke testing finds the cause so we fix the right thing.
Often, yes. If the damage is limited to cracked joints and missing mortar, a HeatShield® / Cerfractory resurfacing can restore the existing terra-cotta liner. If the tiles are badly broken or the flue needs to be resized for a new appliance, a stainless steel or cast-in-place liner is the better fix. We’ll show you the camera footage and explain the options.
Keep the damper closed and don’t light a fire. Smoke won’t drive it out and can cause a dangerous blockage. Call us and we’ll remove the animal and any nest or debris, then install a chimney cap so it doesn’t happen again.
Yes. For repairs, we look at the chimney first and give you the price before any work starts. No obligation.
Contact Us
Call, text or fill out the form. We’ll get back to you the same day.
Services Available
- Routine Maintenance & Cleaning
- Inspections & Diagnostics
- Masonry & Structural Repairs
- Flue Liner Services
- Waterproofing & Leak Prevention
- Hardware, Parts & Upgrades